Certainly not the the first solution for streaming HD programming around your house, a new product called the AircordAV promises to dumb down the whole process into what would appear to be a 5-minute-install, and supports that sweet 1,080p resolution to boot. Instead of asking your existing router to do all the hard work, AircordAV comes with a base unit that hooks up to any of your home theater gear using HDMI, DVI, component, S-video, composite, or SCART connections, and creates its own 802.11g network with up to eight clients feeding any or all of your video displays. Aircord claims the product is capable of lossless streaming, and uses a proprietary technology to encode and decode your video signals, although the company's lack of a website or actual product shots makes us a bit wary of the whole thing. We'll find out in December if this clever idea can be turned into a working device -- that's when the AircordAV will supposedly be released -- and if it can, expect to cough up at least $500 to start cutting those cords.

With the “Origami lifestyle” being portrayed as so fun and carefree, we were surprised to see that UMPCs will also be tasked with the decidedly less fun-filled duty of helping soldiers locate and terminate their targets. The latest high-tech addition to the military’s mobile arsenal is a pocketable 1.4GHz Pentium M-powered tablet from General Micro Systems known as the P630 Spartan, whose half-inch-thick ruggedized case houses 2GB of DDR SDRAM, a 30GB hard drive, 64MB of dedicated VRAM for OpenGL and Direct-X support, and an optional 16GB of bootable flash memory. You also get a CF slot, optional 802.11g or Bluetooth, USB and FireWire ports, and E-Purge hard drive self-destruct utility for your $3,400, although that price is for 100 of the devices, so we’re not sure if they’ll even be willing to sell just a couple to your militia group.

In a move that came as little surprise to those who know how these things work, but that will still probably hurt manufacturers who've been releasing MIMO-enabled networking peripherals for the last few months, the IEEE 802.11 working group tasked with creating a next-gen WiFi standard has recently rejected the first draft of the highly-anticipated 802.11n. Not only did the first 802.11n draft fail to capture the 75% supermajority needed for passage, it couldn't even muster a regular majority among "Task Group N," which is a troubling development for those consumers who have already gone out and purchased pre- or draft-N gear from Linksys, Netgear, and the like. As we've reported in the past, some manufacturers had warned -- and independent testing corroborated -- that draft-N gear could negatively effect current 802.11b/g products already on the market, by hogging the available 2.5GHz bandwidth and causing performance issues on existing WLANs.  Still, taken in a historical perspective, rejection of the first draft of a proposed 802.11x specification is not uncommon, and actually seems to be the rule, rather than the exception, in the life-cycle of these multi-year, multi-party standards talks.

We sure wish we'd had Linksys' WTR54GS travel router a few months ago at CES, where press room Ethernet connections were few and far between, and the single venue offering free WiFi seemingly devoid of techs to keep the network running. Mobile Tech Today also seems to think that this 802.11b/g router would have served us well, providing both basic SecureEasySetup-compatible WEP and WPA encryption along with more advanced Stateful Packet Inspection (SPI) and browser-based fine tuning options for regulating traffic. With four out five stars from MTT, the only downside to this 5.2-ounce router is its range, due mostly to the internal antenna, but when you're sitting five feet away from it in your hotel room that probably won't matter too much.

Despite earlier concerns voiced by chipset manufacturer Airgo that draft 802.11n gear will "degrade" or "disable," current 802.11b/g networks, Linksys claims that it has tested and approved its upcoming suite of draft-n routers and adapters for interoperability with current products on the market. Since 802.11n relies on the multiple channel MIMO technology to deliver higher bandwidths, there has been some speculation that pre-N networks would dominate the spectrum designated for 802.11 communications, even though the draft specification specifically requires so-called mixed mode operation. While it's certainly reassuring to know that Linksys has been working with multiple vendors to ensure that current WiFi gear will perform at "peak levels" in the presence of 802.11n signals, the real test will come when we start seeing actual real-world deployment of these speedy new networks.

We've seen terabyte NAS boxes before. And we've seen wireless ones too. But Iomega may be one of the first companies to combine the two into a simple plug-and-play solution, with the company's 1TB StorCenter Wireless Network Storage device. The box includes gigabit Ethernet, two USB ports, 802.11g wireless networking, and four 250GB, 7200 RPM drives that can be set up in RAID 0, RAID 1 or RAID 5 configurations. The NAS has a suggested retail price of $899. Iomega has also launched a 500GB wired NAS, the StorCenter External Hard Drive, with a price of $499.

Looks like Moto's jumping in the 3G WiFi router arena too soon enough, only their new NC800 isn't kind enough to the user to be carrier-independent and have a PC card slot for your choice of wireless broadband. No, the NC800 is straight up EV-DO Rel. 0, and comes also with your usual 802.11b/g, Ethernet ports, and firewall. Nothing special or out of the ordinary, in other words, but maybe if they get the price down to something reasonable they'll be able to snag a few customers.